oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl67.5m-20a 67.50mhz if saw filter 20.30mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl67.5m-20a january 2011 rev a 67.50mhz if saw filter 20.30mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1 = 120 nh, c1 = 75 pf output l2 = 33 nh, l3 = 120 nh source/load impedance 50 ?
oscilent part number 813-sl67.5m-20a january 2011 rev a 67.50mhz if saw filter 20.30mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 67.50 - insertion loss at fo db - 13.20 15.50 group delay variation at fo9.52mhz ns - 35 60 absolute delay time at fo us - 1.04 - amplitude ripple at fo9.52mhz db - 0.38 0.90 bandwidth at -1db mhz - 20.30 - bandwidth at -3db mhz 20.90 21.05 - bandwidth at -40db mhz - 24.30 24.60 relative attenuation lower sidelobe db 40 47 - upper sidelobe db 40 47 - temperature coefficient ppm/ c - -86 -
oscilent part number 813-sl67.5m-20a january 2011 rev a 67.50mhz if saw filter 20.30mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?10.0 db bandwidth at ?40.0 db ? frequency characteristics
oscilent part number 813-sl67.5m-20a january 2011 rev a 67.50mhz if saw filter 20.30mhz bandwidth product specification p. 4 www.oscilent.com ripple variation at fo9.52mhz group delay variation at fo9.52mhz smith chart
oscilent part number 813-sl67.5m-20a january 2011 rev a 67.50mhz if saw filter 20.30mhz bandwidth product specification p. 5 www.oscilent.com vswr
|